Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Composites End Use
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Processing Guidelines
Material Handling
Aegis® H120MP homopolymer is supplied in sealed containers and drying prior to processing is not required. However, high moisture is the primary cause of processing problems. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level.
- Applications
From flexible packaging for food and consumer products to vacuum bagging for industrial goods, Aegis® packaging grade resins are widely used in a variety of applications, including:
- Processed meats and cheeses
- Coffee, nuts and spices
- Snacks and frozen foods
- Pet foods
- Detergent bags
- Composite fabrications
- Medical devices
- Novelty balloons
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density 1.13 g/cm3 ASTM D-792 Extractable Content max. 0.8 % SOP-702-307 Melt Flow Rate (at 235°C/1.0 kg (455°F/1.0 kg)) 1.9 g/10min ASTM D-1238 Melting Point 220 (428) °C (°F) ASTM D-3418 Moisture (24 Hour) 1.6 % ASTM D-570 Moisture (50% RH) 2.7 % ASTM D-570 Moisture (Saturation) 9.5 % ASTM D-570 Moisture Content max. 0.08 % ASTM D-6869 RV (at 96% Sulfuric Acid) 3.6 - - Viscosity (FAV) 120 - ASTM D-789 - Film Properties
Value Units Test Method / Conditions Carbon Dioxide Permeability 72.8 (4.7) cc.25μm/m²/day (cc.mil/100 in²/day) - Nitrogen Permeability 14.0 (0.9) cc.25μm/m²/day (cc.mil/100 in²/day) - Oxygen Permeability (at 23°C (73°F)/0% RH) 40.3 (2.6) cc.25μm/m²/day (cc.mil/100 in²/day) D-3958 Water Vapor Permeability (at 38°C (100°F)/100% RH) 992 (64) gm.25μm/m²/day (gm.mil/100 in²/day) F-1249
Regulatory & Compliance
- Certifications & Compliance
- Regulatory Compliance
AdvanSix has more than 50 years of experience in the development and production of packaging resin that is safe and reliable for consumers and businesses. Aegis® packaging resins are manufactured to meet the stringent standards required of materials involved in the processing, handling and packaging of food. They meet all applicable U.S. Food and Drug Administration (FDA) and European Union (EU) food grade regulations, as outlined in FDA 21 CFR 177.1500 and Regulation (EU) No. 10/2011.
Technical Details & Test Data
- Extrusion Guidelines
Melt Viscosity vs. Temperature
Melt Temperature: 220°C (428°F)
Melt Temperature Range: 232°C (450°F) to 271°C (520°F).
Two key factors affect the melt viscosity (stiffness or fluidity of the melt):- The molecular weight (Mw) of the resin: Higher Mw resins will have a higher melt viscosity than lower Mw resins.
- Temperature of the melt for any given Mw resin: Higher process temperatures will provide a more fluid melt viscosity than lower process temperatures.
Typical Barrel Profile for Cast Films
Barrel: 230-260°C (446-500°F)
Adapter: 260-266°C (500-510°F)
Die: 260°C (500°F)
Process Melt Temperature: 260-270°C (500-518°F)Typical Barrel Profile for Tubular (Blown) Films
Barrel: 246-254°C (474-490°F)
Adapter: 260°C (500°F)
Die: 254°C (490°F)
Process Melt Temperature: 254-260°C (490-500°F)Screw Parameters
Metering Section: 40%
Transition Section: 3 to 4 flights
Feed Section: Balance of screw length
Compression Ratio: 3.5:1 to 4.0:1
L/D Ratio: 24:1Metering Section Flight Depth
Screw Diameter Recommended Depth 1" 0.055" 1.5" 0.060" 2" 0.070" 2.5" 0.080" 3.5" 0.100" 4.5" 0.115" 6" 0.135"