Aegis® H95C1ZP

1 of 30 products in this brand
Aegis® H95C1ZP is a medium viscosity, nylon extrusion-grade copolymer for cast or blown film applications. Aegis® H95C1ZP combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance. Potential film packaging applications include processed and fresh red meat, poultry, fish, cheese, dried food and chilled fruit juices.

Polymer Name: Polyamide 6/66 (PA 6/66)

Processing Methods: Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion

Technical Data Sheet

Ask AdvanSix Questions

Thomas Clark avatarEd Asirvatham avatarJohn Facinelli avatar
View All Documents

Enhanced TDS

Identification & Functionality

Chemical Family
Polyamides
Polymer Name
Polyamide 6/66 (PA 6/66)
Plastics & Elastomers Functions
Resin
Technologies
Plastics
Product Families
Plastics — Engineering & Specialty Polymers
Polyamides

Features & Benefits

Labeling Claims
Food Contact Acceptable
Materials Features
Chemical Resistant,
Food Contact Acceptable,
Good Abrasion Resistance,
Good Toughness,
Heat Resistance,
Medium Viscosity,
Moderate Strength,
Odorless

Applications & Uses

Markets
Printing & Packaging
Applications
Printing & Packaging — Packaging
Food & Beverage Packaging
Plastics & Elastomers End Uses
Cast Films,
Film,
Food Packaging,
Form Fill Seal Packaging,
Retort Pouches
Plastics & Elastomers Processing Methods
Blown Film Extrusion,
Cast Film Extrusion,
Extrusion,
Film Extrusion

Properties

Color (Properties)
Translucent,
White
Physical Form
Pellets,
Solid
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Point194 (381)°C (°F)ASTM D-3418
Test Parameter
ValueUnitsTest Method / Conditions
Extractable ContentMax. 0.8%SOP-702-307
Viscosity, FAV95ASTM D-789
Melt Flow Rate (at 235°C, 1.0 kg)3.5g/10 minASTM D-1238
SAV (at 96% Sulfuric Acid)3.31--
Specific Gravity (at 23°C)1.13-ASTM D-792
Mechanical Properties (Film)
ValueUnitsTest Method / Conditions
Elongation (at 23°C, 50% RH) - MD*700%ASTM D-882
Elongation (at 23°C, 50% RH) - TD*660%ASTM D-882
Puncture Energy1.4JoulesASTM D-5748
Puncture Force57NewtonsASTM D-5748
Puncture Penetration to Break50mmASTM D-5748
Tensile Modulus (at 23°C, 50%RH) - MD*285MPaASTM D-882
Tensile Modulus (at 23°C, 50%RH) - TD*220MPaASTM D-882
Tensile Strength (at 23°C, 50% RH) - MD*100MPaASTM D-882
Tensile Strength (at 23°C, 50% RH) - TD*80MPaASTM D-882
Tensile Yield (at 23°C, 50%RH) - MD*24MPaASTM D-882
Tensile Yield (at 23°C, 50%RH) - TD*19MPaASTM D-882
Gas Barrier Properties
ValueUnitsTest Method / Conditions
Oxygen Permeability (at 23°C, 0% RH)43cc-mil/m²/dayASTM D-3958
Water Vapor Permeability (at 38°C, 100% RH)830gm-mil/m²/dayASTM F-1249
Moisture Properties
ValueUnitsTest Method / Conditions
Moisture ContentMax. 0.08%ASTM D-6869
Moisture Content (at 24 hours)1.6%ASTM D-570
Moisture Content (at 50% RH)3.1%ASTM D-570
Moisture Content (at Saturation)10.5%ASTM D-570
Note

* MD = Machine Direction and TD = Traverse Direction. Test specimens were obtained from 2-mil thick cast film and tested as conditioned (23°C,50%RH).

Regulatory & Compliance

Certifications & Compliance
Canadian Environmental Protection Act (CEPA),
FDA 21 CFR 177.1500,
FDA Compliant
Chemical Inventories
AICS (Australia),
ENCS (Japan),
IECSC (China),
KECI (Korea),
NZIoC (New Zealand),
TSCA (USA)
Regulatory Information
  • Aegis® H95C1ZP copolymer conforms to FDA requirements of 21 CFR 177.1500 (a) (4) and (b) (4.2) for use as articles or components of articles intended for use in processing, handling, and packaging food, provided that the finished articles meet the applicable use and/or extraction limitations and requirements of relevant regulations.
  • Aegis® H95C1ZP is also suitable for use as a component of food packaging according to the European Plastic Regulations (EC) No. 10/2011, amended in 2018 to No. 2018/79.

Technical Details & Test Data

Extrusion Guidelines
  1. Melt Viscosity vs. Temperature
    Melt Temperature: 194°C (381°F)
    Two key factors affect the melt viscosity (stiffness or fluidity of the melt) :
    1. The molecular weight (MW) of the resin: Higher MW resins will have a higher melt viscosity than lower MW resins.
    2. Temperature of the melt for any given MW resin: Higher process temperatures will provide a more fluid melt viscosity than lower process temperatures.
       
  2. Typical Barrel Profile for Cast Films
    Barrel : 230-260°C (446-500°F)
    Adapter : 260-266°C (500-510°F)
    Die : 260°C (500°F)
    Process Melt Temperature : 240-260°C (464-500°F)
     
  3. Typical Barrel Profile for Tubular (Blown) Films
    Barrel : 246-254°C (474-490°F)
    Adapter : 260°C (500°F)
    Die : 254°C (490°F)
    Process Melt Temperature : 240-260°C (464-500°F)
     
  4. Screw Parameters
    Metering Section : 40%
    Transition Section : 3 to 4 flights
    Feed Section : Balance of screw length
    Compression Ratio : 3.5:1 to 4.0:1
    L/D Ratio : 24:1
     
  5. Metering Section Flight Depth
    Screw Diameter Recommended Depth
    1" 0.055"
    1.5" 0.060"
    2" 0.070"
    2.5" 0.080"
    3.5" 0.100"
    4.5" 0.115"
    6" 0.135"

Packaging & Availability

Packaging Type
Totes (IBC)

Storage & Handling

Storage Information

Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place.

Material Handling

Aegis® H95C1ZP copolymer is supplied in sealed containers and drying prior to processing is not required. However, higher moisture is the primary cause of processing issues. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level. More information about safe handling procedures can be obtained by requesting the Safety Data Sheet.